הטכניון מכון טכנולוגי לישראלXyz
הטכניון מכון טכנולוגי לישראל - בית הספר ללימודי מוסמכים 
Ph.D and MS.c Theses, since 1988.


Advisor Dr. Irena Gotman
Advisor's Email gotman@tx.technion.ac.il
Advisor's Home-Site  
No of theses 23
Department Materials Science and Engineering
Department Web Site materials.technion.ac.il/?lang=he


No.   Student's Name Graduation
Year
Degree Abstracts Research Name
 1 Litvak Barak 2013 MSc Abstracts Wear Resistant TiSiN Nanostructured Multi-Layer Coatings on WC-CO
 2 Rakovsky Artoum 2013 PhD Abstracts Bioinspired Calcium Phosphte-Polylactide Nanocomposites and Scaffolds with Controlled Pore Architecture for Bone Tissue Regeneration
 3 Makarov Carina 2012 PhD Abstracts Bioresorbable Calcium Phosphate Ceramic-Polymer Nanocomposites for Load Bearing Bone Healing Devices - Low Temperature Synthesis and Drug Incorporation
 4 Malka-Markovitz Alon 2010 MSc Abstracts Calcium Phosphate Deposition on Reticulated NiTi Scaffolds
 5 Reiner Tal 2010 PhD
Protein Incorporation in Biomimetic CaP and Sol-Gel Silica Coatings on Ti Alloys for Bone Healing
 6 Gilert Roni 2009 MSc Abstracts Bio-Functionalization of Magnetic Nanopowders Employing Self-Assembled Monolayers (SAM)
 7 Zlotnikov Igor 2009 PhD Abstracts Bioinspired Nanolaminates: Synthesis by Deposition of Zirconium Oxide on LbL Organic Layers and Mechanical Behavior
 8 Gur Ran 2009 MSc Abstracts Processing and Properties of Nano and Sub-Micron Iron Based Composites
 9 Bernstein Michael 2007 MSc Abstracts Development of Bioresorbable Load Bearing Nanostructured Ceramic-Polymer Composites for Bone Graft Substitutes
 10 Zorn Gilad 2007 PhD Abstracts Surface Modification and Bio-Functionalization of Low Modulus Ti-Nb and TiNi Alloys Employing Self Assembled Monolayers (SAMs)
 11 Gutman Itamar 2007 PhD Abstracts Formation Structure and Properties of Periodic Structures at SiO2-Mg Interface
 12 Zlotnikov Igor 2005 MSc Abstracts Combustion Synthesis of Functionally Graded Composites Reinforced by Hard Particles
 13 Shalev Olga 2004 MSc Abstracts Processing and Characterization of Porous Metal-based Structures Designed as Scaffolds for Bone Ingrowth
 14 Horvitz Dror 2004 PhD Abstracts Reactive Forging - a Novel Method of Pressure Assisted Combusrtion Synthesis of Dense Ceramics and in Situ Composites: Ti-O-Al-Mg, B-C-Ti, and Mg-Si Systems
 15 Katz-Demyanetz Alexander 2004 PhD Abstracts Kinetics of Reactions and Reactive Synthesis of Metal- Ceramic Composites in Ni-Ti-B System in the Presence of Ti2Ni and NiB Transient Liquid Phases
 16 Ribak Eliezer 2004 MSc Abstracts Coating of Graphite and Carbon-Carbon Composite via Reaction with Cr Powder
 17 Zamir Shlomit 2003 MSc Abstracts Synthesis of Dense Light Weight Al3Ti/B4C Composites by Pressure Assisted Thermal Explosion
 18 Godley Reut 2003 MSc Abstracts Surface Modification of a Low Modulus Titanium-Niobium Alloy for Use in Medical Implants
 19 Sovak Guy 2003 PhD Abstracts Bone Tissue Reaction to a Novel Titanium Nitride (TiN) Coating on Titanium Alloy (Ti-6al-4V) Implants and the Effect of Growth Factors and Cell Adhesion Molecules on ...
 20 Mashall Ido 2003 MSc Abstracts Reactive Surface Modification of Nickel Alloys by Treatment in Titanium and Nitrogen
 21 Khoptiar Yuri 2002 MSc Abstracts Reactive in Situ Synthesis of Layered Machinable Ti-Based Ternary Ceramic Matrix Composites
 22 Trudler Alexander 2001 MSc
Design of Nanocrystalling Cu and Ag-Cu Alloys by Advanced Powder Metallurgy Methods
 23 Shenhar Anat 2000 MSc
Growth Kinetics and Mechanical Properties of Tin Coatings For Total Joint Implants

Last updated on: Friday ,September 13, 2019